Vehicles
144 not categorized PORSCHE 356C REAR MATCan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.911561053003EQ Rear window cabrio top section, manufactured in Germany with original sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Sonnenland material consists of 3 layers, dyed acrylic twill weave top layer, elastomeric rubber inner layer and polyester woven base layer. It provides increased strength against abrasion, increased fade resistance and the tighter woven layers for the mechanically operated tops. Sonnenland high quality material was originally used by Porsche and other top German manufacturers. Made in Germany. Sold individually. 1 necessary per car.
$984.50
Make a selection 911051 Porsche 911 ac compressor upgrade kit, 1984-89, lh drive model provides improved integrity with our kuehl barrier hose set, kuehl low- high pressure switch to help protect the system, a new denso factory compressor with clutch, new kuehl drier, complete o-ring kit, along with r134a charge port adapters. you can use either r12 or r134a with refrigerant with this complete kit. all barrier hoses match OEM configuration, have sae sae approved crimped fittings and each hose is labeled so you know where it goes.
$1,097.00
Make a selection 911561005003AV This is a complete cabrio top made in Germany with original sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes a trapezoidal pvc plastic rear window with a zipper like the original. If the window gets hazy simply unzip, remove and add a new window. Sonnenland material consists of 3 layers, dyed acrylic twill weave top layer, elastomeric rubber inner layer and polyester woven base layer. It provides increased strength against abrasion; increased fade resistance and the tighter woven layers. Sonnenland high quality material was originally used by Porsche and other top German manufacturers. Made in Germany. Sold individually. 1 necessary per car. For m...(choose a part on the right to read more) View/Change Diagram
From $1,410.20
Make a selection 35271215 Kw variant 3 coilover kit with front hls 2 lift system Porsche 997 c2 05+ General Fitment911 2005-08
$10,253.24
Make a selection 911563051002EQ This is a complete cabrio top made in Germany with original sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes a pvc plastic rear window like the original. Sonnenland material consists of 3 layers, dyed acrylic twill weave top layer, elastomeric rubber inner layer and polyester woven base layer. It provides increased strength against abrasion; increased fade resistance and the tighter woven layers are made for stronger frames. Sonnenland high quality material was originally used by Porsche and other top German manufacturers. This would replace original part # 911 563 051 00 2xw made in Germany. Sold individually. 1 necessary per car.
$1,992.10
Make a selection BES99709260S90 Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips General Fitment911 GT3 2007-11
From $6,698.73
Make a selection 91450302310 Extremely disappointed that the factory discontinued this high appearance direly needed item, we took it upon ourselves via our fellow 914 owner and German engineer juergen to manufacture and identical but superior product. made from the latest waterproof materials and reinforced with stainless steel instead of the the stock metal the factory used, this seal will last threefold as long as the factory original while fooling the best of the concours judges. please buy a set of front and rear and save! also see our perfect fit front and rear bumper guards for you 73 74 owners! View/Change Diagram
$350.00
Make a selection 91450500910S We are proud to announce our spectacular polished stainless chrome-look bumpers. Manufactured to the highest standards and a perfect fit, these stainless steel parts will never rust corrode chip or peel. Identical to the long discontinued factory originals in every way, these bumpers add the ultimate exterior beauty to your 914 without having to suffer a poor and rough re-chrome job! General Fitment2009.89
$2,394.64
Make a selection 91450506310 Are you tires of your sunburned worn, cracked, damaged, or missing bumper guard? As we all know the factory has long discontinued these but we now offer these newly manufactured replacements made from the highest quality automotive waterproof materials with stainless steel inserts. these are identical to the original factory parts in appearance but should last the life of your 914 due to the superior materials save money by ordering a set. Please see our rear guards as well View/Change Diagram
$100.70
Make a selection 91451105200 If your 914 rear trunk acts locked no matter which way you trun the key, the trunk lock cam is broken! We manufacture this part and guarantee it for life! easily installed. Make sure you have it installed at the proper angle and make sure it is contacting the latch before you close the trunk lid! General Fitment914 1970-76
$13.99
Make a selection 9288030330270B High quality, German made three-point replacement safety belt, designed to perform like the original. Features / specs: belt length: 300 cm (118 inches) 3 point inertia reel belt angle adjustable reel (max. Of 8 *) includes 22 cm (8.5 inch) buckle, installation hardware and caps. Din-en-iso 9001: 2000 quality standard manufactured, e-mark approved. The matching rear belt is part # FVD85779570b sold individually. 2 necessary per car. View/Change Diagram
From $162.80
Make a selection 93035204601EQ The zimmermann OEM brake disc combines high-quality cast materials, a vented and perforated braking surface and includes z-coating. Features: better wet braking performance by permanent expulsion of brake dust and water. Sporty look. Anti corrosion "z-coating" prevents rust. Noticeable improvement in braking performance. Countersunk holes double as wear indicator. Simple bolt on, modifications are not necessary. Made in Germany. Sold individually. 1 necessary per car. Rotors should always be changed in pairs; the rear left is part # 93035204501eq
$237.60
Make a selection 96433307301R Looks 100 % OEM but is manufactured with a weather sealed monoball cartridge, for unparalleled suspension precision, sharper response and long lasting accurate alignment. These components are manufactured in europe by an OEM supplier and are meant for racing, clubsport and precision oriented street use. This manufacturer uses the finest materials available, like high carbon steel, 7075 t6 aluminum and spherical solid teflon lined bearings. Upgrade yours today! Sold individually. Right and left needed for the rear axle. Tech tip: washer and lock nut are included for easy installation. But now is the time to replace the old worn hardware as well. Below is a list of what is also suggested for installation. 1 qty. ...(choose a part on the right to read more) General Fitment911 1989-94
$302.50
Make a selection 96433307401R Looks 100 % OEM but is manufactured with a weather sealed monoball cartridge, for unparalleled suspension precision, sharper response and long lasting accurate alignment. These components are manufactured in europe by an OEM supplier and are meant for racing, clubsport and precision oriented street use. This manufacturer uses the finest materials available, like high carbon steel, 7075 t6 aluminum and spherical solid teflon lined bearings. Upgrade yours today! Sold individually. Right and left needed for the rear axle. Tech tip: washer and lock nut are included for easy installation. But now is the time to replace the old worn hardware as well. Below is a list of what is also suggested for installation. 1 qty. ...(choose a part on the right to read more) General Fitment911 1989-94
$302.50
Make a selection 964561005016HA This is a complete cabrio top made in Germany with original sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes a trapezoidal pvc plastic rear window with a zipper like the original. If the window gets hazy simply unzip, remove and add a new window. Sonnenland material consists of 3 layers, dyed acrylic twill weave top layer, elastomeric rubber inner layer and polyester woven base layer. It provides increased strength against abrasion, increased fade resistance and the tighter woven layers are made for modern electric tops with stronger frames, like the 911 and 964. Sonnenland high quality material was originally used by Porsche and other top German ...(choose a part on the right to read more)
$2,201.10
Make a selection 970PCCB We are proud to offer a wide assortment of OEM Porsche parts. Nobody knows more about your car, then its creators themselves. You dont have to question the build quality, attention to detail, or reliability of these. Why trust anyone else? General FitmentPANAMERA 2010-14
$30,726.00
Make a selection 996200260009 Techart coilover suspension kit Porsche 996 c4 c4s 99-04 General Fitment911 1998-05
$6,343.64
Make a selection AP987171C Agency power has this all new OEM replacement exhaust tip for the Porsche 987 Cayman and Boxster vehicles. the dual style tip features large openings with a chrome finish to give the rear of the Porsche a race look. the exhaust tip is adjustable for a perfect fit and can be used with the OEM exhaust or OEM fitting aftermarket systems. each exhaust tip is approximately 3 inch in diameter. General FitmentBOXSTER 2005-08CAYMAN 2006-08
$299.95
Make a selection 99735294901 We are proud to offer a wide assortment of OEM Porsche parts. Nobody knows more about your car, then its creators themselves. You dont have to question the build quality, attention to detail, or reliability of these. Why trust anyone else? View/Change Diagram
From $87.95
Make a selection AA542 Rear window installation kit the ultimate kits for 914 glass installation. Everything you need to insure a perfect factory installation of your 914 rear window. each kit provides exactly what you need for an easy at home installation. Most importantly are the precise instructions! General Fitment914 1970-76
$45.33
Make a selection BES99709060S90 Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips General Fitment911 GT3 2007-11
From $4,331.80
Make a selection BES99126010SOL Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade, t 316 stainless steel material. Features: polished stainless steel double walled to dissipate heat so discoloration will take longer to appear / easier to polish out includes clamps for installation fits the factory cut outs in the bumper perfectly can be adjusted for...(choose a part on the right to read more)
$660.00
Make a selection AP9972TT110 Continuing on our modification path for the Porsche 997.2 turbo, agency power has just finished and released their new carbon fiber cold air intake kit. the carbon fiber airbox is a direct replacement for the OEM intake box. the airbox is made using a prepreg process which allows the entire airbox to be flawless from pulls. similar in shape to the OEM box for fitment, this carbon fiber unit features enlarged holes to fit dual K&N cone air filters. the 2x2 weave is finished in a gloss clear coat and sits nicely where the standard plastic box once was. These filters are pressed in through the rear of the intake box utilizing the rubber seal on the filter as a secure fit. General Fitment911 2005-08
$1,500.95
Make a selection BES98706000S Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade, titanium. Features: dual round 3.5" (90 mm) motorsport grade titanium lightweight 2.73 lbs (1.24 kg) includes clamps for complete installation fills the factory bumper cut out perfectly direct bolt on replacement pre-heated for coloration made in Germany the FVD brom...(choose a part on the right to read more) General FitmentBOXSTER 2009-11
From $1,564.20
Make a selection BES99126010S Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade, t 316 stainless steel material. Features: polished stainless steel double walled to dissipate heat so discoloration will take longer to appear / easier to polish out includes clamps for installation fits the factory cut outs in the bumper perfectly can be adjusted for...(choose a part on the right to read more)
$600.60
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |